What is the operation method of car parking lift?

As the population continues to increase, people's demand for cars is also increasing, and the demand for parking spaces is also increasing. Due to the limitation of urban land area, parking space is in short supply. The use of car parking lift greatly saves parking space and improves the utilization rate of the garage. So, let's take a closer look at the operation method of car parking lift?

Here is the content list:

• Confirm before parking

• How to operate car parking lift

• How to stop in an emergency

Confirm before parking

Before parking, confirm the specification, size and weight of the vehicle that the equipment can accommodate according to the nameplate on the equipment, and check whether the vehicle to be parked meets the requirements. Secondly, check whether the vehicle has outward protrusions to prevent the vehicles from scraping each other and causing the risk of damage. If there are protrusions, they cannot be stored. Then, if there is snow on the vehicle, it must be cleared before entering the equipment to prevent it from affecting the photoelectric appliances.

How to operate car parking lift

The operation of the equipment mainly has two functions, one is storage in and the other is out of storage. When operating the warehousing, when the car parking lift is on the top floor, drive the car into the car parking lift, make sure that the vehicle is parked in the center on the car board, and the device has no sound alarm. When the car parking lift is at the bottom level, press the top door outer operating button, the car parking lift board will automatically rise to position, the top level rolling shutter will open, and the rest of the operations are the same as above. When operating out of the warehouse, when the car parking lift is on the ground floor, drive the car into the car parking lift, make sure that the vehicle is parked in the center of the car, the device does not give an alarm, press the up button in the car parking lift, all the rolling shutters are closed, The system runs when the car board rises to the position, automatically stops the top layer and the rolling gate of car parking lift opens, drives the car out of the equipment, and the bottom layer closes. When the car parking lift is on the bottom floor, first press the operation button outside the bottom door. All the rolling shutters are closed, the car plate is raised and lowered, and the rolling shutters in the bottom layer and car parking lift are opened, and then the above operations are performed.

How to stop in an emergency

When the equipment is running, the operator should pay attention to the operation of the equipment. If an emergency occurs, the emergency stop button should be quickly pressed to stop the operation of the equipment. When the system stops running and emits a warning sound, the operator should stop using the equipment and conduct inspection and maintenance immediately. Press the emergency stop button to lock the program. After the emergency is resolved and the equipment returns to normal, turn the emergency stop button according to the arrow to unlock the program.

Mutrade Industrial Corp. specializes in the production of car parking lift. The production process is strictly controlled in accordance with the standards. The products produced are of high quality and complete in variety. The company also provides high-quality services, which is a reliable choice.