- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English
HP1123 & 1127
Mutrade
Hydro-Park 1127/1123
Two Post Parking Lift
Introduction
Hydro-Park 1127 & 1123 are the most popular parking stackers, quality proven by more than 20,000 users in past 10 years. They provide a simple and greatly cost-effective way to create 2 dependent parking spaces above each other, suitable for permanent parking, valet parking, car storage, or other places with attendant. Operation can be easily made by a key switch panel on control arm.
- Lifting capacity 2700kg or 2300kg.
- Car heights on ground up to 2050mm.
- Platform width up to 2500mm.
- Lifting height adjustable by limit switch
- Electric auto lock release enables easier operation.
- 24v control voltage avoids electric shock
- Galvanized platform, high-heel friendly
- Bolts & nuts passing 48hrs Salt Spray Test.
- Driven by hydraulic cylinder + Korean lifting chain
- Synchronization chain keeps platform level under all conditions
- Akzo Nobel powder coating provides long lasting surfificial protection
- Proven high end quality with CE certifificate, tested by TUV.
Main Features
TUV compliant, which is the most authoritative certification in the world
Certification standard 2006/42/EC and EN14010
Low usage cost
When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power pack
All-new designed control system
Easier manipulation, safer use, failure rate reduced by 50%
Galvanized pallet
Far more beautiful and durable than observed, lifetime more than doubled
Dynamic locking device
A range of locking tabs at every 100mm on the posts to protect cars from falling
Gentle metallic touch, excellent surface finishing
After applying AkzoNobel powder, color saturation, weather resistance and its adhesion are significantly enhanced
Rich color
Great care is taken with the treatment of lacquer face, in order to improve the quality of products on surface looking to the maximum extent
Superior chains provided by Korean chain manufacturer
The life span is 20% longer than that of the domestic chains
Galvanized screw bolts based on the European standard
Longer lifetime, much higher corrosion resistance
Unique hydraulic centralized control (optional)
Perfect shared power pack unit solution
Modular connection, innovative sharing post design (optional)
The Hydro-Park two post car parking lift owns sharing post design. Combine multiple units at your will based on usage
Clear platform width of 2100 mm for car widths of 1850 mm. For large touring sedans we recommend a clear platform width of at least 2300-2500 mm. According to ISO 3864 the floor has to be marked with 100 mm wide yellow-black at a distance of 500 mm from the platform edge by the purchaser (to be performed according to local regulations.) The lowering speed of an empty platform is considerably lower than a loaded one. It is not possible to have channels or undercuts and/or concrete haunches along the floor-to-wall joints. It the event that channels or undercuts are necessary, the system width needs to be reduced or the installation width needs to be wider. The manufacturer reserve the right to construction or model modifications and/or alterations. Furthermore, the right to any subsequent part modification and/or variations and amendments in procedures and standards due to technical and engineering progresses in the art or due to environmental regulation changes, are also hereby reserved.
Hydro-Park 1127/1123
Two Post Parking Lift
Introduction
Hydro-Park 1127 & 1123 are the most popular parking stackers, quality proven by more than 20,000 users in past 10 years. They provide a simple and greatly cost-effective way to create 2 dependent parking spaces above each other, suitable for permanent parking, valet parking, car storage, or other places with attendant. Operation can be easily made by a key switch panel on control arm.
- Lifting capacity 2700kg or 2300kg.
- Car heights on ground up to 2050mm.
- Platform width up to 2500mm.
- Lifting height adjustable by limit switch
- Electric auto lock release enables easier operation.
- 24v control voltage avoids electric shock
- Galvanized platform, high-heel friendly
- Bolts & nuts passing 48hrs Salt Spray Test.
- Driven by hydraulic cylinder + Korean lifting chain
- Synchronization chain keeps platform level under all conditions
- Akzo Nobel powder coating provides long lasting surfificial protection
- Proven high end quality with CE certifificate, tested by TUV.
Main Features
TUV compliant, which is the most authoritative certification in the world
Certification standard 2006/42/EC and EN14010
Low usage cost
When the platform moves down, it will be driven by gravity, so there is no electricity consumption for hydraulic power pack
All-new designed control system
Easier manipulation, safer use, failure rate reduced by 50%
Galvanized pallet
Far more beautiful and durable than observed, lifetime more than doubled
Dynamic locking device
A range of locking tabs at every 100mm on the posts to protect cars from falling
Gentle metallic touch, excellent surface finishing
After applying AkzoNobel powder, color saturation, weather resistance and its adhesion are significantly enhanced
Rich color
Great care is taken with the treatment of lacquer face, in order to improve the quality of products on surface looking to the maximum extent
Superior chains provided by Korean chain manufacturer
The life span is 20% longer than that of the domestic chains
Galvanized screw bolts based on the European standard
Longer lifetime, much higher corrosion resistance
Unique hydraulic centralized control (optional)
Perfect shared power pack unit solution
Modular connection, innovative sharing post design (optional)
The Hydro-Park two post car parking lift owns sharing post design. Combine multiple units at your will based on usage
Clear platform width of 2100 mm for car widths of 1850 mm. For large touring sedans we recommend a clear platform width of at least 2300-2500 mm. According to ISO 3864 the floor has to be marked with 100 mm wide yellow-black at a distance of 500 mm from the platform edge by the purchaser (to be performed according to local regulations.) The lowering speed of an empty platform is considerably lower than a loaded one. It is not possible to have channels or undercuts and/or concrete haunches along the floor-to-wall joints. It the event that channels or undercuts are necessary, the system width needs to be reduced or the installation width needs to be wider. The manufacturer reserve the right to construction or model modifications and/or alterations. Furthermore, the right to any subsequent part modification and/or variations and amendments in procedures and standards due to technical and engineering progresses in the art or due to environmental regulation changes, are also hereby reserved.
